The problem with many mother boards today is that you can have a problem running Windows 7 on the computer. The reason is because Windows 7 did not have USB drivers for USB 3 or USB 3.1 on the CD as it did not exist when Windows 7 came to the market. The message is however generic and does not explain this to the user. It leave you with the impression that the computer lacks a DVD or CD driver which is incorrect. This does not occur with a normal standard CD drive but only with USB CD drives and USB sticks.
- Free Driver Installation Windows 10
- Windows 10 Installation No Drives Found
- Windows 10 Setup No Drives Found
- Windows Installation No Drivers Found In Texas
No device drivers were found
There is also a vague message preceded by an exclamation in a yellow triangle stating “No drivers found Click load driver to provide a mass storage driver for installation.” This article will explore this problem, give the reasons why it occurs and finish off by giving you working solutions to the problem. Fix: No Hard Drives Found in Windows 7 Installer Method 1: Format/Clean the Hard drive using ‘diskpart’ in command prompt. Method 2: Load the hard drive storage controller drivers from a USB into the Windows setup. Method 3: Change the boot controller mode in BIOS. Method 4: Reset BIOS.
- Jun 30, 2018 This however is no guarantee that this will work so you have to get around the message: “ No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK. The solution is rather simple.
- No other OS is installed. While trying to re-install Windows 7 using the Recovery Disk Dell provides, it asks me 'Where do you want to install Windows'. But no drives are visible. It says 'No drives were found. Click Load Driver to provide a mass storage driver for installation'. I want to COMPLETELY erase EVERYTHING on my HD and install.
- Jan 16, 2012 No device drivers were found while installing Windows 7. Installation & Setup: No device Drivers found when installing Win 7 on USB!!!! Im installing windows 7 on a usb i got a 150 gb hard drive this is the link to my specs: HP Support document - HP Support Center I am installing it on a fresh formatted usb stick PLEASE HELP then before.
Many computers come with different types of USB connectors. As an example the TB250 Pro mining motherboard is a good example of this as it comes with USB 2.0 as well as USB 3.0 and USB 3.1. Many times you just have to find the USB 2.0 port and it might start from there. This however is no guarantee that this will work so you have to get around the message:
“No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.“
The solution is rather simple. You will need to download your Windows 7 ISO from Microsoft or from your CD drive and download the following program as the USB 3.0 driver needs to be added to the ISO image while it writes it to your software. Note that this program will also solve your booting problems as the software while adding the drivers to your image will also make your USB stick bootable.
You will need to download the ASUS EZ Installer utility and this will work on all computers. Extract the files in the zip file and then click on the exe file to start the program. The program does not install on your computer and is very portable.
- Click on the EZ Installer file as you can see above.
There are only two options which is Windows 7 ro USB or Windows 7 to ISO. You will want to take the first option as you are going to make the USB drive bootable as well. Insert eh USB drive into the computer and you will need to have at least 8GB in space as it will format the USB drive before it starts to copy. The process is simple:
ISO –> (Add USB Drivers) —> Copy —> Bootable
- Click next once you have selected your option.
- Click in agree and then click onNext.
Select your disc source. Simple click on the drop down list and this is what would be available. Your CD drive will show on there. If you have downloaded an ISO image onto your computer then you will need to “mount” your ISO image so that it looks like a CD drive to the software. You can see this as an example below.
- Right Click on the ISO file on your Windows 10 computer and mount the ISO image (This is built into Windows 10)
- Mount the drive and disable autorun. Once you Click OK the ISO will look like a CD drive to the software. I called it “V” drive
- You will note that the “V” drive is now a CD drive and the source for the making of the bootable USB stick
- Click Next and insert your USB drive.
Select your USB drive and Click on Next and the USB will be formatted and you will then need to wait about 10 minutes depending on your USB drive speed. Once done that will be the end of your problem and you will not get the “No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.“ error message again.
Download USB Installer
VN:F [1.9.22_1171]
VN:F [1.9.22_1171]
[Solved] ‘No device drivers were found’ when installing Windows 7, 10.0 out of 10 based on 1 rating Related Posts
- Windows 10 internet time tab missing (1.000)
- Windows 10 taskbar unclickable (1.000)
- [Solved] Windows Media Creation Tool error 0x80004005 - 0xa001a (1.000)
- USB 3.0 & USB 2.0 Difference (1.000)
- Common Windows 10 Problems (1.000)
Errors: Hard disk not detected during Windows 10 installation
During the process of installing Windows OS on a specified HDD or SSD, you may surprisingly find that the hard disk is not detected during the Windows installation, with either of the following error messages coming along.
'We couldn't find any drives. To get a storage driver, click Load driver.' Scanxl pro software.
'No drives were found. Click Load Driver to provide a mass storage driver for installation.'
However, clicking Load driver doesn't solve the problem at all. What's the next move then? Have you found viable solutions to troubleshoot the case that Windows 10, 8 or 7 installation doesn't detect or recognize the hard drive even it's normally connected to the computer?
5 Solutions to hard drive not detected during Windows installation
Fix 1: Ask help from the manufacturer
Since the manner of installing or reinstalling Windows OS happens so frequently that most personal PC or desktop manufacturers have built-in checking tools for a quick troubleshooting and repair. For example, Dell Online Diagnostic Tool, Lenovo Diagnostic Software for Hard Drive Quick Test, etc. So if you're their customers, feel no hesitate to ask help from the manufacturer and learn how to use tools to fix hard drive not detected issues alright.
Fix 2: Check the hard drive in BIOS
Otherwise, take some time to check if hard drive shows up in BIOS, especially you're installing an operating system from a bootable USB or CD/DVD disc.
By holding and pressing F2, you'll enter BIOS settings. See if the hard drive showing up there. Click solution to repair hard drive not showing in BIOS.
If not, Check your BIOS settings for the following parameters:
* SATA configuration -> Enhanced
* Configure SATA -> AHCI
* SATA configuration -> Enhanced
* Configure SATA -> AHCI
Fix 3: Use third-party software
Here we find another three solutions that can perfectly clear the errors and make your desired hard disk appear on the screen of Windows install. And all the fixes can be done by a third-party free partition manager.
You may have heard of EaseUS Partition Master, which is a very powerful disk & partition management software that allows you to format a corrupted hard drive, check hard drive, repair bad sectors, wipe hard drive and more. Next, you're going to make full use of the three mentioned features to remove the error of hard disk not detected during Windows installation. (Method 2 and method 3 are running to erase all data on the hard drive and make it a totally new one, so make sure that you have made a full backup of what you need.)
Let's launch the software you've installed on PC, and take a look at how to proceed with every feature that is helpful.
Method 1. Check and repair hard drive bad sectors or other errors
Step 1: Open EaseUS Partition Master on your computer. Then locate the disk, right-click the partition you want to check, and choose 'Check File System'.
Step 2: In the Check File System window, keep the 'Try to fix errors if found' option selected and click 'Start'.
Step 3: The software will begin checking your partition file system on your disk. When it has completed, click 'Finish'.
Method 2. Format hard drive that is not showing in Windows install screen Resident evil 4 game.
Step 1: Run EaseUS Partition Master, right-click the hard drive partition you intend to format and choose 'Format'.
Step 2: In the new window, set the Partition label, File system (NTFS/FAT32/EXT2/EXT3), and Cluster size for the partition to be formatted, then click 'OK'.
Free Driver Installation Windows 10
Step 3: Then you will see a warning window, click 'OK' in it to continue.
Step 4: Click the 'Execute Operation' button in the top-left corner to review the changes, then click 'Apply' to start formatting the partition on your hard drive.
Method 3. Wipe hard drive that is not detecting by Windows install
Windows 10 Installation No Drives Found
Windows 10 Setup No Drives Found
Step 1: Launch EaseUS Partition Master, right-click the partition you want to erase data from, and choose 'Wipe Data'.
Step 2: In the new window, set the time for which you want to wipe your partition, then click 'OK'.
Windows Installation No Drivers Found In Texas
Step 3: Click the 'Execute Operation' button in the top-right corner, check the changes, then click 'Apply' to wipe the data on your partition.